Isolated footing: A type of Shallow footing (DISCOVERED)

Saad Iqbal | 🗓️Modified: August 25, 2019 | ⏳Time to read:6 min

Isolated footing transmits the load of a single column to the underneath soil. It is also termed as spread footing because it spreads the concentrated load on the column to on a wider soil area so that stress intensity is reduced.

[su_box title=”Take Note” box_color=”#4be97f”]Isolated footing is defined as a type of shallow footing that transmits the load of a single column to the underneath soil. [/su_box]

Isolated footing is regarded as the most economical footing, reason being that it is neither too deep as in case of pile foundation and doesn’t have more requirement of reinforced concrete quantity as in case of raft foundation. Instead, in isolated footings; the columns are spaced far apart and for each column a pad is provided at the bottom called isolated footing.

Usually the isolated footings are in square or rectangular shape. However, for circular columns you can also opt circular isolated footing. Isolated footing is actually a type of shallow foundation with deep foundation another type of footing.

Isolated footings are only provided when it is absolutely certain that there would be no varying settlement keeping in view the bearing capacity of the soil under the required design load. Isolated footing should not be used when a bearing of widespread loads is required. In such cases either strip footing or mat or raft footing should be provided.

[su_note]Raft Foundation – Interesting facts about Raft or Matt Foundation[/su_note]

Isolated Footing
Isolated Footing

Design inputs

For the design of isolated footing, one must know the column load and moment to be transferred and allowable bearing soil pressure or bearing capacity should in known in terms of KN/m2. Based on the grade of concrete and steel; the footing is designed. The geotechnical design includes the size of footing as well as depth of the footing based on the inputs. Whereas, the structural design of isolated footing gives you the reinforcement requirement.

The main and distribution reinforcement are provided at suitable distances while the anchors for the column are embedded in the footing pad with appropriate development length. This gives column and footing a monolithic connection or fixed restraint against vertical load and bending moment.

For specialized cases, soil characteristics, and loading conditions; the isolated footing can be combined either in rectangular and trapezoidal shape in plan such footings are called combined footings.  For property constraints sometimes the columns have to be tied specially to cater eccentricity of loadings and for that a strap beam is provided connecting the two isolated footings. Such a type of footing is called a strap beam.

Clear cover to the reinforcement is very critical in case of foundations. In areas where the underground water is way below the footing depth a clear cover of 50 mm is enough. However, for soils where ground water movement is shallow and seepage is also there the clear cover should be more than 75 mm.

Types of isolated footing

Isolated footing bends in a dish shaped form and to resist such effect reinforcement mesh is provided to resist internal shear forces and bending moment.

Actually isolated footings have to components – a slab and a pedestal. The slab can have uniform or non-uniform thickness across the depth. Keeping in view the uniformity of the slab thickness there are three types of isolated footings.

Pad footing

The simplest and most common type of isolated footing is pad footing. It includes a slab of uniform thickness throughout the depth.

Stepped Footing

The stepped and sloped footing is actually used in situations where there is a chance of punching shear failure so the end connection of the column with the footing is strengthened. In stepped footing, two or three steps are provided that are monolithic with the footing.

Sloped Footing

In slopped footing an inclined flared section is produced in the sloped footing. A top slope of 45 degree is maintained from all four sides. The amount of reinforcement and concrete used in the sloped footing is less than that of plain isolated footing.

The slab can also have different shapes in plan but it entirely depends on your loading conditions, architectural preferences, and other various design inputs.

Square Footing

Square footing includes reinforcement in both direction to resist shear forces and bending moment. An effective depth value among the footing in two directions is only minor and can be neglected.

Rectangular Footing

In rectangular footing, the reinforcement bars are provided in longer direction while in shorter direction the shrinkage reinforcement is provided. In some cases for longer direction of footing, reinforcement is placed in shorter direction at the middle position.

Circular Footing

Circular footing is not that common these days and is only used in special cases.

Advantages and disadvantages

The biggest advantage of isolated footing is economy. It is cost effective than all other types of footing, as it involves minimum usage of construction materials i.e. concrete and reinforcement. It is easy to make and doesn’t require very heavy duty excavation as in case of raft foundation.

The only disadvantage is differential settlement. Because each column has different footing in such an arrangement so there are chances of differential settlement which can cause severe cracking in the building elements. Isolated footing can be subjected to torsion or tension forces easily.

 

 

 

Saad Iqbal is a professional civil engineering and freelance write. He's passionate about structures, construction management, and home improvement topics. He's been working as a Senior Engineer in a consultant firm for over 8 years. Besides he loves writing informative and in-depth content focused on construction and home-related topics. You can catch him at his linkedin page or reach out via our contact us page.

Read all his articles

Leave a Comment